 |
 |
 |
|
 |
|
 |  |
 |
 |
door, fire rated glass door
|
|
 |
|
| Construction Contractors, Architect, Building, Construction |
|
|
| |
|
 |
|
 |
|
 |
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
Sample Specification | Technical Specification | Frame Armour Profile |
|
Frame Armour Profile
A frequent problem encountered on bulk door replacement schemes is the possible damage to internal decorations and finishes which can result from the removal of an existing door frame and the installation of a new frame set. Such damage is often unavoidable and can lead to claims being made by the tenant against the housing authority.
Protection of the existing frame with special steel profiles (powder coated in white or to colour choice) can be used in the vast majority of cases to upgrade the original frame to a standard suitable for the fitting of high security doors and lock systems.
Should any original frames be badly damaged or otherwise unsuitable for re-use, then total replacement will of course be necessary. This may take the form of a simple sub-frame plus armour cladding, or full frame replacement in hardwood or steel.
PRIME FEATURES
 |
Frame armour cladding can remove the need for full frame replacement thereby reducing costs and avoiding the risk of damage claims arising during the contract.
|
 |
Total installation time is reduced to 3-4 hours thus minimising inconvenience to the tenant and ensuring that the dwelling is secured in the shortest possible time.
|
 |
The design of the armour cladding system enables the correction of any ‘out of square’ frames and allows opening sizes to be regulated so that all doors can be mass-produced without regard to minor size variations which commonly occur.
|
 |
Further benefit is that by eliminating the need for on site setting up, the security doors can be factory pre-finished under controlled conditions for the best results.
|
 |
Because the armour is made in two sections to each jamb and the head, external attack will not dislodge the primary armour section and the interlocking nature assists the dissipation of impact load forces over the whole frame.
|
 |
The armour incorporates mountings for adjustable hinges which make it impossible to split the hinge from the frame and the special hinges provide for three way adjustment to set the correct closure gap and alignment.
|
 |
Frame armour profiles are formed from zinc coated mild steel sections which are stove enameled/powder coated in a white gloss or textured finish. Other colours are available subject to quantity and a small additional cost |
|
|
 |
|
door fire wood, fire rated access door, fire door label, door fire glass screen, fire rating door, the door come on baby light my fire, sliding fire door, door fire uk, door fire holder, door fire hardware, fire rated steel door |

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| All Rights Reserved, © Multi-Installations Ltd, 2005. |
Designed & Developed by i-serve group. |
|
|
|
|